| Lump of Steel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Description | |||||||
| Type | Common lumps | ||||||
| Weight | 0.125 Stones | ||||||
| Length | 2 | ||||||
| Recipe 1 | |||||||
| Quantity | Ingredient | Influence | |||||
| 2 × | Lump of iron  |
70 % | |||||
| 2 × | Flux | 10 % | |||||
| Durability | Equipment | Influence | |||||
| 30 | Bloomery | 5 % | |||||
| 30 | Crucible and tongs | 5 % | |||||
| Crafting | |||||||
| Required skill | Forging | ||||||
| Minimum skill level | 60 | ||||||
| Skill influence | 10 % | ||||||
| Starting tool | Bloomery | ||||||
| Crafting duration | 2 | ||||||
| Resulting quantity | 1 | ||||||
| Recipe 2 | |||||||
| Quantity | Ingredient | Influence | |||||
| 1 × | Steel bar |
100 % | |||||
| Durability | Equipment | Influence | |||||
| 30 | Crucible and tongs | 0 % | |||||
| 15 | Bloomery | 0 % | |||||
| Crafting | |||||||
| Required skill | Forging | ||||||
| Minimum skill level | 60 | ||||||
| Skill influence | 0 % | ||||||
| Starting tool | Bloomery | ||||||
| Crafting duration | 2 | ||||||
| Resulting quantity | 8 | ||||||
| Recipe 3 | |||||||
| Quantity | Ingredient | Influence | |||||
| 1 × | Steel ingot |
100 % | |||||
| Durability | Equipment | Influence | |||||
| 30 | Crucible and tongs | 0 % | |||||
| 15 | Bloomery | 0 % | |||||
| Crafting | |||||||
| Required skill | Forging | ||||||
| Minimum skill level | 60 | ||||||
| Skill influence | 0 % | ||||||
| Starting tool | Bloomery | ||||||
| Crafting duration | 2 | ||||||
| Resulting quantity | 40 | ||||||
| ID 413 | |||||||
Lumps of steels are created by adding at least 2 Lumps of iron (melting point 1500 °C) and 2 Flux (melting point 500 °C) into a Furnace, Forge and Anvil, or Bloomery, and heating it up to 1500 °C. When the materials are properly heated you can use the Smelt command to fabricate Steel Lumps. Make sure you have a standard crucible and tongs equipped, NOT the primitive version.
Note: The recipe for creating lumps of steel directly from lumps of iron is the most inefficient method for fabricating steel as far as Flux consumption is concerned. This recipe requires 2 Flux per lump of steel, or 16 Flux for one steel bar, or 80 Flux per steel ingot. It is therefore recommended that you use a Bloomery to melt down steel ingots into these lumps, as by doing this you will be spending .3 Flux per lump instead of 2 Flux per lump.